Trailer Roof & Side Panel Repair in Brampton & GTA — On-Site, 7 Days
- Price before we start
- Usually there within 24 hours
- Punjabi · Hindi · English
Real jobs by our crew. Tap a photo to see it full size.
A hole in the roof or a torn side skin lets water into the load and keeps the trailer off the road. We repair trailer roofs and side panels at your yard, a dock or our shop, so it does not have to be towed across town.
What we repair
Roof and wall damage on dry vans, reefers and box bodies usually comes from a few causes: a low clearance strike, a forklift going through a side wall, a loose load shifting against the skin, or an old crack that has finally opened up. The work we do includes:
Torn or punctured side skins and roof sheets — damaged section cut out and a new patch or panel section welded in, where the material allows it.
Cracked or broken roof bows — the ribs that hold the roof shape, welded or replaced so the roof stops sagging.
Split panel seams and post connections — re-welded where the wall meets the posts, rails or rear frame.
Bent or buckled walls — straightened where possible, with the cause checked before we close it up.
Steel and aluminum — we weld both on the van with MIG, stick and plasma, using our own generator.
Repair or replace the panel?
A small puncture or a short tear is normally a patch job. A wall that is crushed across a large area, or skin that is thin and corroded all around the damage, may be better replaced in sections. We look at it before we quote, and tell you which makes more sense instead of welding over a problem that will reopen.
Photos help us decide quickly. Send one wide shot of the whole side or roof and one close-up of the damage, taken from the inside too if you can reach it.
Check the structure behind the damage
The skin is often the visible part of the damage. A hit hard enough to tear a wall can also bend a post, a roof bow or a cross member underneath. When we repair a panel we check the frame members around it, so you do not fix the skin and find the real problem on the next inspection.
Price and timing
We do not give a price over a chat or guess one in advance. Send a photo to 437-985-7311 and we quote the job before we start, then send an itemized invoice afterwards. If you have several units with panel damage, we can do them in one yard visit with an itemized invoice per unit. We are open 7 AM – 7 PM, 7 days a week.
Where we do this work
We come to Brampton, Mississauga, Toronto, Vaughan, Milton and the rest of the GTA. For somewhere further out, call and ask.
Questions
Can you fix a roof leak without towing the trailer?
In most cases yes. The welding van comes to your yard or dock and works on the trailer where it is parked.
Do you repair aluminum skins as well as steel?
Yes, we weld both steel and aluminum. See our aluminum trailer welding page for more.
Do you work on reefer trailers?
Yes, we repair roofs, side walls and doors on reefers as well as dry vans.
How do I get a price?
Text or WhatsApp photos of the damage to 437-985-7311. You get the price before any work starts.
Helpful guides
Trailer side panel damaged? Tape, patch or replace: how to decide
Reefer or dry van roof leaking? How to find the leak and fix it properly
Related services and areas
Aluminum Trailer Welding
Cracks, tears and broken brackets on aluminum trailers, welded on site.
Trailer Welding & Fabrication
Structural trailer welding and custom fabrication, from one cracked member to a rebuild.
Trailer Door Repair
Swing doors, hinges, lock rods and rear frames repaired on site.
Mobile Trailer Welding
The welding van comes to your yard or dock.
Get a price for this job
Fastest is a call or a WhatsApp photo. Or send this form with up to 3 photos and we'll get right back to you. Mobile service across Brampton & the GTA, 7 AM – 7 PM, 7 days.
Send a photo. Get a price in minutes.
Call, text or WhatsApp — 7 AM – 7 PM, 7 days a week.